Stucco for Indirect Lighting
Wall and ceiling mouldings that conceal the LED source, accommodate wiring and create soft ambient light without visible points of light.
Ambient Lighting Concealed Within an Architectural Profile
Stucco profiles for indirect lighting conceal the LED strip and turn light into a soft line directed towards the wall or ceiling. Depending on the model, a profile can also serve as a curtain pelmet, a cable channel or a support for direct LED spotlights without extensive plasterboard work.
Mouldings for indirect lighting conceal the LED strip behind a shaped edge, allowing the light to reflect towards the ceiling or wall. This creates an even ambient glow and a clean transition without exposing the light source.
Wall and ceiling models can be installed directly below the ceiling, lower on the wall, as a curtain profile or as part of an illuminated ceiling feature. The position of the profile determines the direction and intensity of the lighting effect.
The ambient light line can use a single-colour or RGB LED strip with compatible power and controls. The selected components must fit the intended channel and remain accessible for servicing.
The 3-in-1 profiles combine space for wiring, openings for direct LED spotlights, a channel for an indirect LED strip and the finished decorative moulding in a single element. Cable routes, power supplies and service access must be planned before installation.
The LED channel and internal reflective aluminium layer help direct the light and prevent it from showing through the profile. Only low-heat LED light sources may be used, and all wiring and power supplies must be installed by a qualified professional.
Solutions for Different Types of Lighting
Concealed Wall LED Lighting
Ceiling and Corner Lighting
Illuminated Curtain Profiles and 3-in-1 Profiles
Indilight Range
Wall, Corner and Ceiling Profiles for LED Lighting
Compare the shape, dimensions and purpose of each profile to choose the right model for a wall, corner, ceiling, curtain cornice or lighting island.
Wall Profiles for Indirect Lighting
LI 1 to LI 8 profiles are installed on the wall, closer to or farther from the ceiling depending on the desired amount and direction of indirect light.
LI 1
Dimensions: 17 × 13 cm
Wall profile clearly showing the concealed LED strip position and direction of indirect light.
LI 2
Dimensions: 12 × 8,5 cm
LI 3
Dimensions: 10 × 7,5 cm
LI 4
Dimensions: 6 × 7 cm
LI 5
Dimensions: 8 × 12,5 cm
LI 6
Dimensions: 9 × 4 cm
LI 7
Dimensions: 9 × 6,5 cm
LI 8
Dimensions: 4 × 7 cm
2-in-1 Corner Profiles
Corner stucco and an indirect-lighting profile are combined in one element. LI 9 to LI 11 are installed between wall and ceiling, while LI 12 is the largest model with two LED-strip channels.
LI 9
Dimensions: 14 × 6,5 cm
LI 10
Dimensions: 14 × 6,5 cm
LI 11
Dimensions: 14 × 6,5 cm
LI 12
Dimensions: 19 × 9 cm
The largest corner model with two LED-strip channels.
3-in-1 Corner Profiles
Inventive 3-in-1 corner profiles combine a service box, openings for recessed LED spotlights or panels, and a channel for an indirect LED strip. Installed between the wall and ceiling, they offer a practical and elegant alternative to more complex and time-consuming plasterboard construction. LD, ANA and BARBARA profiles are intended for direct LED lighting only.
LID 1
Dimensions: 9 × 19 cm
LID 2
Dimensions: 9 × 19 cm
LID 3
Dimensions: 9 × 19 cm
LID 4
Dimensions: 9 × 19 cm
LID 5
Dimensions: 9 × 19 cm
REBECCA
Dimensions: 9 × 29 cm
Corner Profiles for Direct Spot Lighting
LD, ANA and BARBARA profiles are designed for direct LED spotlights at the wall-to-ceiling transition. Electrical preparation and light-fitting positions must be defined before installation.
LD 1
Dimensions: 8 × 19 cm
LD 2
Dimensions: 8 × 19 cm
ANA
Dimensions: 9 × 29 cm
BARBARA
Dimensions: 9 × 29 cm
Ceiling corner profile designed for direct GU10 LED spotlights.
Ceiling Profiles, Curtain Cornices and Lighting Islands
ENA, KLARA, MARTINA, LI 13 and LI 14 profiles are installed on ceilings. ENA, KLARA and MARTINA can be used as standalone ceiling light features, also known as lighting islands.
LI 13 KARNIŠA
Dimensions: 14 × 9 cm
Designed as a shade for indirect lighting and, at the same time, as a cornice that conceals curtain tracks.
ENA
Dimensions: 5 × 19 cm
KLARA
Dimensions: 9 × 29 cm
MARTINA
Dimensions: 9 × 38 cm
LI 14
Dimensions: 4,5 × 19 cm
Ceiling profile for indirect wall lighting.
Price List
Complete Indilight Profile PDF Price List
Individual prices for available models are shown with their photographs. The PDF contains the complete list of profiles, dimensions and prices.
Note: Before ordering, request confirmation of the current price, model availability, production time and delivery cost.
Safe Installation
Planning LED Lighting and Electrical Work
Define the positions of the LED strip, spotlights, cables, drivers and service access before bonding and finishing the profiles.
IMPORTANT NOTICE!
The profiles are made from XPS and are used as decorative mouldings, LED-strip shades, cable-routing elements or housings for the specified LED spotlights. Electrical preparation must match the intended use of the selected model before installation.
High-Heat Lighting Is Strictly Prohibited
For direct lighting, use only 3 to 5 W GU10 LED bulbs (220–240 V). Do not install halogen lamps or any other light source that generates high temperatures. LED panels may be used only with high-quality, correctly rated and protected drivers.
Properly Insulated Electrical Wiring
All wiring, connections and circuits must be properly insulated, protected and arranged to remain accessible for safe servicing.
LED Panels Only in Profiles Designed for Them
An LED panel may only be installed in a profile designed for that purpose. Its driver must be high quality, correctly rated, protected and installed in a dry, service-accessible location.
Planning Before Profile Installation
Define the position of the LED strip, spotlights, wiring, driver and service opening before the stucco is fixed and finished.
Poor-Quality Drivers Can Cause a Fire!
Use only high-quality, correctly rated and protected drivers. Installation and connection must be carried out by a qualified professional in accordance with applicable standards.
Responsibility for Installation and Electrical Work
Michelangelo d.o.o. Čakovec accepts no responsibility for the installation or use of light fittings in profiles from its product range, or for damage caused by improper installation, faulty or poorly insulated wiring, unsuitable light fittings or poor-quality drivers.
Models and Installations
How Profiles for Indirect and Direct LED Lighting Work
Frequently Asked Questions
Frequently asked questions about profiles for indirect LED lighting
What are the profiles for indirect LED lighting for?
Profiles for indirect LED lighting hide the LED strip and create a soft light against the wall, ceiling, niche or curtain zone. They are a good choice when you want a clean decorative transition without a visible light source.
Should the electricity be planned before mounting the profile?
Yes, the position of the LED strip, cable, power supply and switch should be agreed upon before making and mounting the profile. Electrical work should be carried out by a professional.
Can the LED profiles hide the cornice or cables?
In many cases, they can help to hide the edge of the curtain, the cables or the transition to the ceiling, but this should be planned according to the actual depth of the profile and the space available for installations.
Which LED strip to choose for decorative profiles?
The choice of LED strip depends on the desired light intensity, color warmth and cooling method. Michelangelo can prepare the profile and position of the lighting, and the final selection and connection of the lighting should be coordinated with the electrician.
Can the LED strip be replaced later?
Yes, if the driver, connections and LED strip remain accessible for service. Access must be planned before the profile is closed and painted.
Are you planning hidden LED lighting in the profile?
Provide approximate lengths, room height and the type of profile you need. For LED profiles, the power supply position and desired direction of light are also important.
